Locktite Industrial Sealants

Showing 1–12 of 17 results

Loctite 222

Technical Information

Color Purple
Fixture Time 8.0 - 360.0 min.
Key Characteristics Thixotropic
Substrates Metal: Steel, Metal: Steel - Stainless Steel, Metal: Brass

Loctite 243 50ml

Technical Information

Color Blue
Fixture Time 5.0 - 10.0 min.
Key Characteristics Thixotropic
Specific Gravity, @ 23.0 °C 1.08
Substrates Metal: Steel - Stainless Steel, Metal: Brass

Loctite 638 – 50ml

Technical Information

Color Yellow
Fixture Time 25.0 min.
Gap Fill 0.1 mm
Substrates Metal: Steel

Loctite 641 50ml

Technical Information

Color Yellow
Fixture Time 25.0 min.
Gap Fill 0.1 mm
Substrates Metal: Steel

Loctite 648 250g

Technical Information

Color Green
Fixture Time 3.0 min.
Gap Fill 0.15 mm
Substrates Metal: Steel

Loctite 401 20g

Technical Information

Color Clear: Ultra Clear
Fixture Time 3.0 - 10.0 sec.
Gap Fill 0.15 mm
Key Characteristics General Purpose, Viscosity: Low Viscosity

Loctite 510 50ml

Technical Information

Color Red: Pink
Fixture Time 25.0 - 45.0 min.
Gap Fill 0.25 mm
Lab Shear Strength 5.0 N/mm²
Substrates Metal: Steel, Metal: Aluminum

Loctite 2701 50ml

Technical Information

Chemical Basis / Base Methacrylate
Color Green
Fixture Time 4.0 - 25.0 min.
Substrates Metal: Steel, Metal: Steel - Stainless Steel, Metal: Brass
Viscosity, Brookfield - RVT, @ 25.0 °C Spindle 2, speed 20 rpm 500.0 - 900.0 mPa·s (cP)

Loctite 406 20g

Technical Information

Color Clear: Ultra Clear
Fixture Time 2.0 - 10.0 sec.
Gap Fill 0.05 mm
Key Characteristics Viscosity: Low Viscosity
Substrates Plastic, Rubber

Loctite 3475 A&B – Metal Set A1 500g

Technical Information

Chemical Type Epoxy
Appearance (uncured) Gray, putty
Components Two-part  [Resin & Hardener]
Mix Ratio, by weight- Resin: Hardener 1 : 1
Mix Ratio, (by volume) Resin: Hardener 1 : 1
Cure Room temperature cure after mixing
Application Industrial maintenance
Maximum Gap 1.0mm
Specific Benefit Low shrinkage properties Does not rust

Loctite 3471 A&B – Metal Set S1 500g

Technical Information

Fixture Time 180.0 min.
Mix Ratio, by Volume 1 : 1
Shear Strength 20.0 N/mm²
Work Life 45.0 min.